Posts tagged “water

Fountain

This was a bit of a lens flare and shutter speed test I did the other day. I think Rollei did pretty damn well!

Rolleiflex 2.8 E, Ilford HP5+ 400 ISO Film, CanoScan 9000F Scanner.


Return Of The Rollei

Rollei has been away for the last 3 weeks having some repairs done as well as a bit of a general service… The Rollei withdrawal has been a bit harsh but the 35mm fix has been helping to stop the cold sweats and occasional bouts of shakes.

Anyway I got it back last week and have put about 3 rolls of film through it already and I’m feeling much better…

There is some sort of Karate tournament on at the moment so there are people doing stuff like this all over the city

Rolleiflex 2.8 E, Ilford FP4+ 125 ISO Film, CanoScan 9000F Scanner.


More Waterfront Action. Rowers This Time

So I went down to the waterfront again before work on Sunday this time with my trust Nikkor 80-200 f2.8 hoping to catch a bit more from the Dragon Boat racing that was going on the day before. Unfortunately they weren’t there but the rowers were just coming back after a mornings training.

Nikon F5, 50mm f1.8 and 80-200 f2.8 Lenses, Ilford HP5+ 400 ISO Film, CanoScan 9000F Scanner.


Dragon Boats

On one of my many before work wanders (I no longer work so these have now become extinct, RIP) I came upon a training session for the upcoming Dragon Boat races. Armed with only my trust Nikon F5 and a 50mm f1.8 lens I set about trying to capture the event in a very short window of opportunity before I was supposed to be at work.

Nikon F5, 50mm f1.8 Lens, Ilford HP5+ 400 ISO Film, CanoScan 9000F Scanner.


A Good Day For Swimming?

All I can say is Brrrrrrrrr…

Nikon F5, 50mm f1.8 Lens, Ilford HP5+ 400 ISO Film, CanoScan 9000F Scanner.


This Would Have Been A Good Valintines Day Image

Such is the way with film…Sometimes you just have to wait…

Hope everyone had a good one 🙂

Still haven’t heard back to see if Rollei is fixable yet…Starting to get a bit nervous…

Rolleiflex 2.8 E, Ilford HP5+ 400 ISO Film, CanoScan 9000F Scanner.


A Bit of Surface Flooding

Driving home from work last Sunday I drove past a drain that consistently floods and in the torrential rain decided to pull over (risking the wrath of being home late) and take some images out the window of cars going past through the large puddle.

Unfortunately there wasn’t a lot of traffic around at that time and after about 10 minutes and only two cars I gave up and went home 🙂

Rolleiflex 2.8 E, Ilford HP5+ 400 ISO Film, CanoScan 9000F Scanner.


Titahi Bay Black and White

Finally got round to developing and scanning the Black and White film images taken the other week at Titahi Bay.

This was the first roll of Ilford Pan F+ 50 ISO film through the Rollei and I have to say that I like it. This week I am trying Kodak Tri-X 400 which should also be interesting to see how it comes out.

 

 

Rolleiflex 2.8 E, Ilford Pan F+ 50 ISO Film.


Beach Football at Titahi Bay

Went out shooting last night with Fergus to Titahi Bay with the idea of doing some long exposure shots after the sun went down. While we were scouting various locations a game of football started up so we stopped and took some images while the sun went down.

It was lucky we did cause none of the long exposure stuff really came out… You win some and you lose some 🙂

Nikon D70s, 18-70mm Lens, ISO 200.


How It Was Done: Water Drop Shot

Ok so I havent done one of these in a while and the entry’s for the Photo5 competition have closed so theoretically no one can copy this for the competition.

Anyway here is the finished image that I submitted to the competition….

Competition Brief: Eye Dropper

This brief is asking you to use your lens to look closer. Use the eye dropper to place drops of liquid in any arrangement you want. You can use a single drop, or as many drops as you like.

And you’re not limited to just water – feel free to use liquids of different colours and consistencies, such as milk or tomato soup. Just make sure you get close.

OK that seems simple enough…

I had the idea to suspend a drop of water from the head of a pin and using a slide projector somehow get an image into the drop (at this point I want to say that using Photoshop wasnt an option that I really wanted to use).

Equipment Used: Kinderman Slide Projector, Nikon D70s with 50mm f1.8, 2 x Nikon PK13 and 1 x PK12 Extension Tubes, Tripod, Cullman Macro Rail, Various supports like chairs, 1 x Pin, Bluetac and a 42″ translucent reflector (used later on)… Oh and various slides.

So I set up the projector at the same height as the camera and blasted a slide onto the drop of water (which took at least 15 minutes to get to stay on the head of the pin) which produced the following image.

Even at 1/5000th of a second this was about as good as it got… Not really the look I was going for…

Step 2: Place a 42″ reflector in front of the projector to act as a screen… At the moment the projector is about 1.5 metres away from the water droplet.

Ok at this point I stop thinking “what the heck am I doing this is never going to work I must be crazy”! And start seeing a small glimmer of hope projected down a very bright slide projector.

However still not really what I had in mind when I initially set out.

Step 3: Time to move everything back away from the projector… now about 3 metres away still with the reflector in front acting as a screen.

I keep forgetting stuff… The slide was projected onto the screen upside down so that it was right side up in the droplet.

OK now we are cooking but still not quite right.

This is what the setup currently looks like (the images are from a point and shoot so sorry about quality/focus issues)

My studio is soooo sophisticated 🙂

Who needs a macro lens when you have a bazillion extension tubes…

Opps almost forgot to say that I added a small pop of speedlight at the pin just to give it a bit of a catch light.

Anyway I found that by moving a reflector backwards and forwards I could alter how much of the image would appear in the drop so after a lot of stuffing round (293 images from the first shot) this is the image that I liked the best…

This is the file straight off the camera with no processing

With a bit of straightening and a saturation boost and not to mention all the dust removal here we go 🙂

And before I forget here is a scan of the slide that I used…

All droplet shots on Nikon D70s with 50mm f1.8 Lens with 2 x Nikon PK13 + 1 PK12 Extension Tubes.


Balls

School holiday fun in the sun (about the only sunny day)

Rolleiflex 2.8 E, Ilford HP5+ 400 ISO Film


Burst Water Main Revisited

A couple of weeks ago I posted some digital shots of a burst water main in Manners mall (original post here).

I finally got round to processing the film from my Rollei along with some follow-up shots.

Apparently the City Council doesn’t have accurate plans of where the pipes in this area are and the water pipe does an unexpected U up towards the surface which is where the digger driver hit it.  He should have been safe to go about another 30cm deeper… No one was hurt and only One shop suffered enough damage that it is suing.

People in the top floor of the apartment pictured behind who had their windows open got a bit soaked.

You can see in this shot that the pipe goes up and over something… Apparently this isn’t in the plans.

 

Rolleiflex 2.8 E, Ilford FP4 125 ISO Film.